Covid-19   We are still open.

Deliveries may take longer.

Contact us to confirm availability

Please find below our own easy-to-follow photographic instruction manual,

showing you how to install the top-fixing  hinges which use the plastic toggle fixings,

such as the UN4, BL6 and D02, etc.   Please see below for general details and guidelines.

Website & photographs © N. Wolstenholme 2008 - 2020      Oddcolours Ltd. 16 Anson Close, Rugby. CV22 7HX

All numbers TPS / CTPS registered      VAT No.: 990 8750 73      Company No.:  06900061      ICO Reg'd  ZA375588  

You should have a bag with the above / similar components included. Take the screws from the base of the metal rectangular pieces.

Bend the plastic corregated piece, so that the metal rectangular parts can slot into the holes in your wc pan. Do this on both sides.

Hold the top hollow ring and firmly slide the venturi down the corregated plastic dual notches until the venturi piece is snug inside the holes in your pan.

Ensure the screw can screw into the pan before moving the dual-sided corregated plastic part

side to side, so it snaps off, leaving just the venturi showing.

Then, attach the rubber protector to the

underside of the metal disc.

Screw 95% of the way in, so that the circular disc and spigot protruding up can be moved.

Do the same on both sides.

Carefully align your seat to the lugs on the seat and cover., Turning the circular discs with spigots protruding,

so they line up. Once lined up, slot the seat carefully onto the spigots to ensure that you have got

the metal circular discs in the correct positions.

Fully tighten the screws into the pan holes,

now that the spigots are in the correct position.

Install the seat fully onto the protruding spigots.

Check that the seat is central.

If so, all done!